Digital Zoom Function; Image Stabilizer Function; Fade In/Out Functions - Panasonic NV-DS27 Operating Instructions Manual

FOCUS
1
MENU
30tW
D.ZOOM
1
FOCUS
1
MENU
1 2
S SEARCH FADE
s
r
6 5 ∫
1, 3
20

Digital Zoom Function

This function is useful when you want to record close-up shots of subjects
2
located beyond a normal zoom range of 1k to 15k magnification. With the
Digital Zoom Function, you can select a magnification of 30k or even to
W
T
600k.
1
2
To Stop the Digital Zoom Function
Set [D.ZOOM] on the [CAMERA SETUP] Sub-Menu to [OFF].
≥As the magnification of digital zoom increases, the quality of image may
deteriorate.
T ≥White balance cannot be set in the digital zoom range.
~~~~~~~~~~~~~~~~~~~~~~~~

Image Stabilizer Function

If the Movie Camera might be shaken while recording, the camera shake in
the image can be corrected.
≥If the Movie Camera shakes too much, this function may not be able to
stabilize images.
1
To Cancel Image Stabilizer
Set [SIS] on the [CAMERA SETUP] Sub-Menu to [OFF].
≥For other notes concerning this item, see page 40.
~~~~~~~~~~~~~~~~~~~~~~~~

Fade In/Out Functions

Fade In
Fade In brings out images and sounds gradually from a black screen at the
beginning of a scene.
1
2
3
STILL BLC
; 1
Fade Out
Fade Out causes images and sounds to disappear gradually, leaving a black
screen at the end of a scene.
OFF ON
2
1
2
3
≥The still picture cannot fade in or fade out.
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [30t] or [600t].
≥30k: Digital zooming to 30k
≥600k: Digital zooming to 600k
To zoom in or out, push the [W/T] Zoom Lever towards [W] or
towards [T].
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [SIS] >>
[ON].
1
≥The [[] Indication
appears.
1
Keep pressing the [FADE] Button during the Recording
Pause Mode.
≥The image fades out gradually.
When the image is completely gone, press the Recording
Start/Stop Button to start recording.
Release the [FADE] Button about 3 seconds after starting
recording.
≥The image reappears gradually.
2
Keep pressing the [FADE] Button while recording.
≥The image fades out gradually.
When the image is completely gone, press the Recording
Start/Stop Button to stop recording.
Release the [FADE] Button.