Writing Printing Data On A Card; Protecting The Files On A Card - Panasonic NV-GS50EN Operating Instructions Manual

3
Turn the [PUSH] Dial
desired title.
(38)
WB/SHUTTER/IRIS/
PUSH
MF/VOL/JOG
≥The selected title is marked with a
frame.
4
Press the [PUSH] Dial
the [MULTI] Button
≥The selected title is displayed.
≥Recording and Photoshot Recording
can be done with pictures that have
titles.
To Clear the Title Display
Press the [TITLE] Button
≥The [ACCESS] Indication appears until
the titles are displayed completely.
Perform the Recording after the
[ACCESS] Indication disappears.
≥For other notes concerning this item,
see .
-128-
Writing Printing Data on a
Card
(DPOF Setting)
DPOF Setting Printing data (DPOF
Settings), such as the number of images
to be printed, can be written to the Card.
"DPOF" means Digital Print Order
Format.
1
Slide the
[TAPE/CARD/CARD MODE]
Selector (27) to [CARD MODE] until
the [PICTURE] Indication appears.
CARD CARD
TAPE
MODE
(27)
CARD Mode
(38)
to select a
(38) or press
(14) .
(10) .
2
Set [CARD FUNCTIONS] >>
[CARD EDITING] >>
[DPOF SETTING] >> [YES] >>
[VARIABLE].
(46)
2
≥To print all pictures one at a time,
select [ALL 1]. When all images are
not printed, select [ALL 0].
3
Select a desired picture and press
the [PUSH] Dial
≥The selected picture is marked with
a frame.
≥The number of prints set by DPOF
1 is displayed.
4
Turn the [PUSH] Dial
the number of pictures to be
printed, and press the [PUSH] Dial
(38) .
≥[¥] Indication 2 is displayed in the
picture set. (
5
Repeat Step 3 and 4 and press the
[MENU] Button
is completed.
To Verify DPOF Setting
Select [VERIFY] in Step 2. The pictures
for which 1 or more print is set in DPOF
are played back continuously.
≥For other notes concerning this item,
see .
-128-

Protecting the Files on a Card

(Lock Setting)
Precious files recorded on a Card can be
locked (to prevent accidental erasure).
(Even if files are locked, the files will be
deleted when the Card is formatted.)
-112-
(38)
WB/SHUTTER/IRIS/
PUSH
MF/VOL/JOG
DPOF SETTING
(PRINT QUANTITY)
1
PRESS MENU TO EXIT
(38) .
(38)
and select
)
-118-
(46)
when the setup