The One Touch Free Style Grip Belt; Attaching The Lens Cap - Panasonic NV-GS50EN Operating Instructions Manual

≥The times shown in the table are for
continuous recording at a temperature
of 20oC and humidity of 60%. If the
Battery is charged at a higher or lower
temperature, the charging time may be
longer.
The One Touch Free Style
Grip Belt
ª To Use as a Grip Belt
Adjust the length of the Grip Belt to the
size of your hand.
1
Detach the tip of the Grip Belt.
2
Slide the pad to obtain the optimum
length.
3
Reattach the Grip Belt.
ª To Use as a Hand Strap
Using the Grip Belt as the hand strap
makes it easier to handle and carry the
Movie Camera. It is more convenient to
use with the Free Style Remote
Controller with Mic.
Before Use
1
Open the Lock Cover
holding the tabs on both sides 1,
press the Lock Button
detach the Grip Belt.
(20)
2
Slide the pad of the Grip Belt.
3
Attach the Grip Belt around your
wrist.
≥When putting the Grip Belt back to the
Grip Belt Attachment part, press on the
Lock Cover 2 to be securely locked.

Attaching the Lens Cap

To protect the Lens surface, attach the
Lens Cap.
1
Pass one end of the Lens Cap Cord
through the attached eye on the
Lens Cap. Then pass the other end
through the loop made by itself and
pull tight.
-73-
(20)
by
(19)
1
(19)
2
and