Panasonic NV-GS50EN Operating Instructions Manual page 105

3
Press the [PHOTO SHOT] Button
(26)
.
PHOTO
SHOT
(26)
≥When [
H] is selected, the still
pictures can be recorded in
approximately 0.08 seconds
intervals until the [PHOTO SHOT]
Button is released or 16 pictures are
recorded.
≥When [
L] is selected, the still
pictures can be recorded in
approximately 0.7 seconds intervals
until the [PHOTO SHOT] Button is
released or 8 pictures are recorded.
ª Automatically Copying Still
Pictures That Have Already
Been Recorded on a Tape
The images with the Photo Index signals
are automatically recorded to the Card.
1
Set the Movie Camera to Still
Playback Mode at the scene
immediately before you want to
start copying images.
(13)
STILL
2
Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >>
[RECORD TO CARD] >> [YES].
(46) (38)
WB/SHUTTER/IRIS/
PUSH
MF/VOL/JOG
≥During copying, the Indication
appears.
T A P E
NOW WRITING
≥Search starts from the current Tape
position, and images with Photo
Index signals are recorded onto the
Card sequentially.
CARD Mode
;
%
C A R D
To Stop Automatic Recording
Press the [∫] Button
(12)
FADE
≥For other notes concerning this item,
see .
-126-
ª Recording a Moving Picture
(MPEG4)
You can record moving pictures for
e-mailing on a Card. The recorded data
can be also played back on Windows
Media Player.
Recording from the Movie Camera
Lens (Camera Mode)
1
Set the [TAPE/CARD/CARD MODE]
Selector
TAPE
2
Slide the
[TAPE/CARD/CARD MODE]
Selector
the [MPEG4] Indication appears.
3
Press the Recording Start/Stop
(44)
Button
(44)
≥It takes 2 to 3 seconds to start
recording.
≥During recording the [
Indication is lit in red.
≥The maximum continuous recording
times are:
[SUPERFINE] (super high image
quality): 2 minutes
[FINE] (high image quality):
2 minutes
[NORMAL] (normal image quality):
120 minutes
The Movie Camera will automatically
stop recording when the relevant
time listed above has elapsed.
-105-
(12) .
(27) to [CARD].
CARD
CARD
MODE
(27)
(27)
to [CARD MODE] until
.
]
MPEG4