Wide Mode; Image Stabilizer Function; Wind Noise Reduction Function - Panasonic SDR-H250EP Operating Instructions Manual

LSQT1210_EP(EN).book 48 ページ ２００７年２月９日 金曜日 午後６時０分
Recording

Wide mode

This is for selecting the screen's
aspect ratio when recording motion
pictures.
This allows you to record images compatible with
wide-screen TVs (16:9) and regular TVs (4:3).
∫ Recording images with a 16:9
aspect ratio
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [REC ASPECT] > [16:9]
and press the joystick.
∫ Recording images with a 4:3
aspect ratio
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [REC ASPECT] > [4:3]
and press the joystick.
≥ The default setting is [16:9].

Image stabilizer function

This is for reducing image shakes
during recording.
Reduces the image shaking due to hand
movement when recording.
¬ Rotate the mode dial to select
.
48
LSQT1210
Press the MENU button, then select
[ADVANCED] # [O.I.S.] # [ON] and
press the joystick.
[HDD] [SD]
To cancel the image stabilizer function
Press the MENU button, then select
.
[ADVANCED] # [O.I.S.] # [OFF] and press the
joystick.
≥ This function's default setting is [ON].
≥ In the picture recording mode, pressing the
Photoshot button [
effect of the image stabilizer function. (MEGA
optical image stabilizer) (SDR-H250)
MENU
≥ In the following cases, the image stabilizer
function may not work effectively.
jWhen the digital zoom is used
jWhen the unit is shaken greatly
jWhen you record a moving subject while
tracking it
Wind noise reduction
.
function
This is for reducing the wind noise
coming into the microphone when
recording.
¬ Rotate the mode dial to select
[HDD] [SD]
or
MENU
] halfway increases the
[HDD] [SD]
.