Card Mode; Using A Card; Recording On A Card; Inserting A Card - Panasonic NV-GS50EN Operating Instructions Manual

Digital video camera model no. nv-gs50en
Hide thumbs Also See for NV-GS50EN:
Table of Contents

Advertisement

CARD Mode

Using a Card

A Card can be used to record still
pictures.
≥Use genuine Card only.
ª Inserting a Card
Before inserting a Card, be sure to turn
off the Movie Camera.
1
Slide the [OPEN] Lever
the Card Slot Cover
OPEN
(4)
2
While holding the Memory Card
with its cut corner facing right 1,
insert it into the Card Slot
3
Close the Card Slot Cover
securely.
Removing the Card
Open the Card Slot Cover and press the
centre of the Card and then pull it
straight out.
≥After removing the Card, close the
Card Slot Cover.
≥The Movie Camera may be damaged if
the Card is forced out when the Card is
fully inserted.
ª [ACCESS] Lamp
(3)
ACCESS
While the Movie Camera is making an
access to the Card (reading, recording,
playback, erasing or moving of images),
the [ACCESS] Lamp lights up.
≥While the [ACCESS] Lamp is on, never
attempt to open the Card Slot Cover, to
pull out the Card, to turn off the Movie
Camera, or to switch the
[TAPE/CARD/CARD MODE] Selector.
Such actions will damage the Card,
cause loss of recorded data and cause
the Movie Camera to malfunction.
CARD Mode
(4)
to open
(5)
.
(5)
(6)
.
(6)
1
(5)
(3)
-103-

Recording on a Card

3 kinds of data can be recorded by
selecting with the
[TAPE/CARD/CARD MODE] Selector
(27)
. When recording picture, slide the
[TAPE/CARD/CARD MODE] Selector
until the [PICTURE] Indication 1
appears (Card Photoshot), when
recording moving picture, slide the
[TAPE/CARD/CARD MODE] Selector
until the [MPEG4] Indication 2 appears
(MPEG4 Recording), when recording
voice, slide the
[TAPE/CARD/CARD MODE] Selector
until the [VOICE] Indication 3 appears
(Voice Recording).
CARD
CARD
TAPE
MODE
(27)
2
1
PICTURE
3
≥If the [TAPE/CARD/CARD MODE]
(27)
Selector
is set to [CARD] with a
Card inserted, the Movie Camera is
automatically turned off when you
leave it for about 6 minutes without
performing any recording.
≥When the [TAPE/CARD/CARD MODE]
Selector
(27)
is set to [CARD], you
cannot record to the Tape.
ª Card Photoshot
Still pictures can be recorded on the
Memory Card from the Movie Camera
lens as well as from scenes that have
already been recorded on a cassette.
Recording from the Movie Camera
Lens (CAMERA Mode)
1
Set the [TAPE/CARD/CARD MODE]
Selector
(27)
to [CARD].
CARD
CARD
TAPE
MODE
(27)
MPEG4
VOICE

Advertisement

Chapters

Table of Contents
loading

Table of Contents