Panasonic NV-GS50EN Operating Instructions Manual page 98

2
Press the [SELECT] Button
the Remote Controller to select a
desired digital effect.
K
∫
SELECT
(62)
VAR.
SEARCH
STORE
OFF/ON
(64)
P.B.DIGITAL
≥When the [SELECT] Button is
pressed repeatedly, the digital effect
selection changes.
≥The same setting can be done using
[DIGITAL EFFECT] Sub-Menu on
the [VCR FUNCTIONS] Main-Menu.
To suspend Playback Digital Effect
Temporarily
Press the [OFF/ON] Button
suspend or restart the digital effect.
When the digital effect is paused
temporarily, the selected effect's
indication flashes.
To Cancel the Digital Effect
Press the [SELECT] Button
Remote Controller and clear the digital
effect indication.
≥For other notes concerning this item,
see .
-124-
ª Wipe Mode and Mix Mode
1
Press the [1] Button
V
/REW PLAY
(75)
6 1
STILL ADV PAUSE STILL ADV
E
;
INDEX STOP INDEX
K
∫
SELECT
2
Press the [SELECT] Button
the Remote Controller and select
[WIPE] or [MIX].
K
∫
SELECT
(62)
VAR.
SEARCH
STORE
(63)
OFF/ON
(64)
P.B.DIGITAL
3
Press the [STORE] Button
the moment you want to save as a
still picture.
≥The [B] or [C] Indication
appears, and the image is saved.
4
Press the [OFF/ON] Button
the scene in which you want to use
the Wipe or Mix effect.
≥The scene changes as a result of the
Wipe or Mix effect.
VCR Mode
(62)
on
L
P.B.
ZOOM
MENU
SET
ITEM
(64) to
(62) on the
(75) .
W
FF/
W
5
D
L
(62)
on
L
P.B.
ZOOM
MENU
SET
ITEM
(63)
at
(64) in
≥The Wipe Function and Mix Function
can be used only from the Remote
Controller during playback.
≥If the [OFF/ON] Button
while Wipe or Mix is carried out, the
effect will stop temporarily at that point.
Pressing the [OFF/ON] Button
again will bring back the effect.
ª Playing back with Multi-Picture
Mode
Strobe Multi-Picture Mode [STROBE]
You can capture 9 consecutive still
pictures from playback video.
Manual Multi-Picture Mode [MANUAL]
Selecting a desired still picture one at a
time, you can capture 9 still pictures.
Index Multi-Picture Mode ([PHOTO],
[SCENE])
You can capture 9 screens of pictures to
which index signals have been attached.
1
Set [VCR FUNCTIONS] >>
[DIGITAL EFFECT] >>
[EFFECT SELECT] >> [MULTI].
(46)
2
Set [VCR FUNCTIONS] >>
[MULTI-PICTURES] >>
[SCAN MODE] >> [STROBE],
[MANUAL], [PHOTO] or [SCENE].
When [STROBE] is selected:
≥Set the [SPEED] to a desired strobe
speed. At the [FAST] setting,
9 consecutive still pictures is
captured within approximately
1 second, at [NORMAL] within
approximately 2 seconds, and at
[SLOW] within approximately
3 seconds.
≥If you set [SWING] to [ON], the
intervals at which the 9 still pictures
are taken are longer at the beginning
and end than in the middle of the
swing strobe period, and it is useful
for analyzing swing motion, etc. in
sports.
-98-
(64)
is pressed
(64)
(38)
WB/SHUTTER/IRIS/
PUSH
MF/VOL/JOG