Panasonic NV-GS1 User Manual

4, 5
1, 2
3, 5
TAPE CARD CARD
CARD MODE
MULTI/
P-IN-P
PICTURE
640 640 640
640
640 640
No.25 100-0014
1, 3
TAPE CARD CARD
CARD MODE
To Select a Desired File and Play It Back
1
Set the [TAPE/CARD/CARD MODE] Selector to [CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the desired type of data indication
appears. (NV-GS5 only)
3
Press the [MULTI] Button.
≥The files recorded on the Card are displayed in Multi-Picture Mode.
4
Turn the [PUSH] Dial and select a desired file.
≥The selected file is marked with a frame.
≥When 7 or more files have been recorded, turn the [PUSH] Dial to
display the next file. (The [6] Button or [5] Button can be used
instead of the [PUSH] Dial.)
5
Press either the [PUSH] Dial or the [MULTI] Button.
≥The selected file is shown on the entire screen.
2
Picture Size (When [PICTURE] is selected at Step 2)
FINE or NORMAL (When [MPEG4] is selected at Step 2)
3
File Number
4
Folder-File Number (When [PICTURE] or [MPEG4] is selected at Step 2)
Using File Search Mode
1 1 1 1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
2 2 2 2
Turn the [PUSH] Dial and select the desired file number, and
press the [PUSH] Dial.
≥For other notes concerning this item, see page 46.
~~~~~~~~~~~~~~~~~~~~~~~~~

Recording Pictures on a Card to a Tape

Card Images can be recorded on the Tape one at a time or all automatically.
After setting to Card Playback Mode, please carry out the following
procedures.
To Copy 1 Picture
1
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [PICTURE] Indication appears.
(NV-GS5 only)
2
Display a desired picture.
3
Set the [TAPE/CARD/CARD MODE] Selector to [TAPE].
4
Press the [PHOTO SHOT] Button.
≥During the copying, the indication
≥It takes a few seconds to record a picture to the Tape.
≥When recording to tape, select the tape position before recording. The
4
picture will be recorded to the tape position when the [PHOTO SHOT]
PHOTO PHO
Button is pressed at Step 4.
SHOT SHO
To Copy All the Pictures
1 1 1 1
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [PICTURE] Indication appears.
(NV-GS5 only)
2 2 2 2
Display the first picture.
≥If a picture other than the first one is displayed, only the subsequent
pictures will be copied.
3 3 3 3
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[RECORD TO TAPE] >> [YES].
≥During the copying, the indication
≥It takes a few seconds for each picture to be copy on the Tape. To stop
the copying midway, press the [∫] Button.
≥Moving Picture (MPEG4) and Voice data cannot be recorded from a Card to
tape. (NV-GS5 only)
≥For other notes concerning this item, see page 47.
5
1
appears.
1
appears.
1
37