Table of Contents
Advertisement
Unlocking the Console:
To unlock the mixing console press the SYSTEM menu button. Using the up/down keys scroll through the menu
until LOCK is displayed, press CONFIRM. Using the up/down keys scroll through the menu until the desired
level of unlock is displayed on the screen, then press the confirm button.
Locking the Console:
To lock the mixing console press the SYSTEM menu button. Using the up/down keys scroll through the menu
until LOCK is displayed, press CONFIRM. Using the up/down keys scroll through the menu until TOTL is
displayed on the screen, then press the CONFIRM button.
The LOCK button located on the MODE SWITCHES disables the Assign keys, Mode switches and Set switches
on the Centre section and input faders.
Storing a Scene:
Setting up a scene, Assigning VCA, Mutes, Faders etc.
Assigning VCAs:
a/ Ensure that the lock button is not illuminated on the mode switches (if it is just press
the button to extinguish the LED).
b/ Press the VCA mode button so that it is illuminated. This has now selected the VCA
mode on the input modules.
c/ Using the ASSIGN KEY select which master VCA you wish to assign to a particular
input module ( 1-10 ). Quickly enabling a button will clear all other buttons enabled
so only the one selected is illuminated, push and holding the button down for
0.25seconds will not disable other buttons previously enabled.
d/ On the input channels you wish to assign to the master VCA(s) selected press the
SET Button, the relevant LED(s) on the input channel will illuminate. If the SET
button is pressed quickly the VCAs selected on the assign keys will be added to those
already selected on the channel. If the SET button is pressed and held for a short time
then any VCAs already selected on that channel will be cleared and replaced with
those selected on the assign key.
Assigning Mutes:
a/ Ensure that the lock button is not illuminated on the mode switches if it is just press
the button to extinguish the LED.
b/ Press the MUTE mode button so that it is illuminated. This has now selected the mute
mode on the input modules.
c/ Using the ASSIGN KEY select which Automutes you wish to assign to a particular
input module ( 1-10 ). Quickly enabling a button will clear all other buttons enabled
so only the one selected is illuminated, push and holding the button down for
0.25seconds will not disable other buttons previously enabled.
d/ On the input channels you wish to assign to the Automutes selected press the
SET Button, the relevant LED(s) on the input channel will illuminate. If the SET
button is pressed quickly the Automutes selected on the assign keys will be added to
those already selected on the channel. If the SET button is pressed and held for a short
time then any Automutes already selected on that channel will be cleared and replaced
with those selected on the assign key.
Fader Position:
a/ Ensure the Virtual Fader recall mode button is not illuminated and the faders are in
normal mode, if this is enabled the new fader position will not be stored.
b/ Move the faders to the desired position.
The only other automated buttons on the console to be set are the Input Mutes, Master
VCA Mutes, Group Mutes, Matrix Mutes and Master Mutes.
45
Hide quick links:
Advertisement
Table of Contents
