Table of Contents
Advertisement
It is possible to "pick up" all the faders and
then set them to 0dB if adjustment is not
required. There is no need to "clear" them.
This is a user preference.
Any virtual fader can be isolated from
further scene recall by pressing the
AUTOmation SAFE switch. After the
switch is pressed it will also be possible to
"pick up" the virtual fader at the recalled
position and adjust it using the real fader
(exactly the same as for store mode). Any
subsequent scene recall will have no effect
on the virtual fader position.
To regain virtual fader control switch the
AUTOmation SAFE switch off and then
recall the current (or next required) scene.
Virtual fader control will resume as the
scene is recalled. The fader will not be
"picked up" and can be moved to -infin if
desired as long as it does not pass through
0dB. If it does pass through 0dB it will
"pick up" in the normal way.
Any input channel virtual fader can be
totally isolated by pressing the FADER
SAFE switch. At this point the virtual fader
will "snap" to match the real fader position
and any master VCA and automation
control will be removed. To regain virtual
fader control switch the fader safe off and
recall a new scene. The real fader can then
be cleared to -infin in the normal way.
It is not possible to store a scene in this
mode. The main reason this is not allowed
is because multiple overstores of faders
which have adjustments made would result
in incremental virtual fader position
changes which in most cases would not be
desired.
If faders are not cleared prior to recalling a
new scene it may be advisable to clear
them immediately afterwards to avoid
confusion.
Any virtual fader can be isolated from
further scene recall by pressing the
AUTOmation SAFE switch. After the
switch is pressed it will also be possible to
"pick up" the virtual fader at the recalled
position and adjust it using the real fader.
Any subsequent scene recall will have no
effect on the virtual fader position.
To regain virtual fader control switch the
AUTOmation SAFE switch off and then
recall the current (or next required) scene.
Virtual fader control will resume as the
scene is recalled. The fader will not be
"picked up" and can be moved to -infin if
desired as long as it does not pass through
the virtual fader position. If it does it will
"pick up" in the normal way.
Any input channel virtual fader can be
totally isolated by pressing the FADER
SAFE switch. At this point the virtual fader
will "snap" to match the real fader position
and any master VCA and automation
control will be removed. To regain virtual
fader control switch the fader safe off and
recall a new scene. The real fader can then
be cleared to -infin in the normal way.
When storing a scene the information
loaded into the scene memory will always
be as displayed by the leds. This still
applies if a fader is isolated by the fader
safe or automation safe switches.
41
Hide quick links:
Advertisement
Table of Contents
