Talk Mic; Mono Output - Midas HERITAGE 2000 Operator's Manual

The TALK XLR socket accepts balanced
W
150 microphone signals.
The MIC GAIN preset gives continuous
adjustment of the microphone amplifier
gain from +20dB to +60dB and operates
in conjunction with a peak limiter which
is factory set to +10dBu.
The TALK TO INTERNAL switch
connects the talk mic output to the
console's internal talk system and at the
same time dims all the local outputs by
20dB to prevent howl round.
The TALK input routes the talk external
input to the mono local monitor output.
The MONO masters switch routes the
post fader mono master mix to the mono
local monitor output.
The SOLO switch routes solo signals to
the mono local monitor output when ever
a solo is active on the console. This
overrides any signals sent from the mono
master but does not override talk inputs.
The mono output "b" C/O switch
disconnects the mono local monitor
output from the main "a" output and
re-routes it to the secondary "b" output.
The phones MUTE switch mutes the
headphone outputs.
The ST master switch routes the post
fader stereo master mix to the stereo local
monitor outputs.
The MONO master switch routes the post
fader mono master mix to the stereo local
monitor outputs.
30

talk mic

+40 0
+20 +60
+10
mic gain
level
talk talk
internal external
meter
change
PRE
over
0
TALK
input
+10
level
MONO
0
masters
SOLO
+10
level
mono source

mono output

output 'b'
C/O
mute
0
+10
phones
MUTE
ST EXT
MONO SOLO
stereo source
The talk LEVEL gives continuous
adjustment of the post limiter signals
from +10dB to off.
The TALK TO EXTERNAL switch
connects the talk mic output to the talk
external output XLR.
The PRE meter change over switch
changes the operation of every meter on
the console (except the monitor meters).
The "normal" meter operation is to
monitor pre fader on input channels and
post fader on all other signals. When the
pre meter change over is active the meters
change to monitor input amplifiers or bus
amplifiers (as appropriate) on all signals.
The talk LEVEL gives continuous
adjustment of the external talk input
from +10dB to off.
The talk LEVEL gives continuous
adjustment of the external talk input
from +10dB to off.
The mono output MUTE switch mutes
the mono local monitor output.
The PHONES level control gives
continuous adjustment of the headphone
level from + 10dB to off.
The EXT switch routes the stereo external
input (2 track return etc.) to the stereo
local monitor outputs.
The SOLO switch routes solo signals to
the stereo local monitor outputs when
ever a solo is active on the console. This
overrides any signals sent from the stereo
master, mono master or external input.