Midas HERITAGE 2000 Operator's Manual page 15

The lo mid FREQ control gives
continuous adjustment of the frequency
range that the lo mid equaliser acts on
from 100Hz to 2k.
The bass BELL switch converts the bass
equaliser from traditional MIDAS
shelving response to full parametric
operation.
The bass FREQ control gives continuous
adjustment of the frequency range that
the bass equaliser acts on from 20Hz
to 400Hz.
The HI PASS switch connects the filter
in the input channel signal path before
the insert point and equaliser.
0
500
15
15
lo-mid
100 2k
+/-
Q
freq
0
bell
100
15
15
bass
20 400
freq
60 160
freq
20 400
The LO MID (dual concentric top)
control gives continuous adjustment of
boost and cut from + 15dB to - 15dB
with a 0dB centre detent.
The lo mid WIDTH (dual concentric
bottom) control gives continuous
adjustment of bandwidth from 0.1 to 2
octaves with a 0.5 octave centre detent.
The BASS (dual concentric top) control
gives continuous adjustment of boost and
cut from + 15dB to - 15dB with a 0dB
centre detent.
The bass WIDTH (dual concentric
bottom) control gives continuous
adjustment of bandwidth from 0.1 to 2
octaves with a 0.5 octave centre detent.
This only operates when the BELL switch
is activated.
The HI PASS filter control is
continuously adjustable from 20Hz to
400Hz.
3