Midas HERITAGE 2000 Operator's Manual page 50

The SYSTEM switch gives the operator access to the system menu. Navigation of the menu
is achieved by using the UP/DOWN switches to select an entry and then pressing CONFIRM
to execute the selected function or sub menu. To exit a menu or sub menu press CANCEL.
automation
system
store midi
insert delete
check cancel
act
act/scene
c/o
down
last now
38
The system menu contains LOCK which defines the level
of console operation.
These levels are: -
system
TOTL All automation and assignment functions are disabled
RCAL Only recall and assignment functions are available.
STOR Scene storage/editing, recall and assignment are operational
SYSTAll functions are available.
copy
Operating the STORE key will store the current console
assignments and settings to the snap shot being displayed on the
numeric display.
confirm
The MIDI key allows the operator to edit the snap shot MIDI
information. On entering this mode the operator will be presented
with a menu of the four MIDI messages that are stored within each
snap shot, its operation is similar to the system menu.
The COPY, DELETE and INSERT keys allow the operator to edit
the snapshot sequence in the following manner.
scene
up
INSERT. Pressing this key will allow the operator to insert a
snapshot at the number on the numeric display. The scene that
was originally at the number and all con-current scenes will be
re-numbered by adding one to their scene numbers.
next
COPY. This will copy the snapshot currently displayed on the numeric
display to a temporary memory location. This can then be stored or
inserted to a new scene number in the normal fashion. When in copy
mode a fast scene number can also be assigned to the scene by simply
pressing the desired fast scene switch.
MIDAS
DELETE will erase the snapshot that is currently being displayed
on the numeric display from the automation memory.
The CHECK switch provides a preview of any snapshot on the
console surface WITHOUT recalling the ACTUAL setting to the
console surface (mutes are displayed on the safe switches so that
current mute status is always present and accurate). Whist in check
mode the ACT/ SCENE C/O, and UP/DOWN switches can be used
to step through the snapshots.