Table of Contents
Advertisement
8. Help
8.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
"CALL SERVICE"
"CARRIAGE ERROR"
"CHANGE DRUM"
"CHANGE SUPPLIES"
"CHECK DOCUMENT"
"CHECK DRUM"
"CHECK MEMORY"
"CHECK PICK UP
INPUT TRAY #1"
"CLOSE ADF COVER"
"DIRECTORY FULL"
"DRUM LIFE LOW
REPLACE SOON"
"FAX IN MEMORY"
"KEEP COPYING"
"LOW TEMP."
"MEMORY FULL"
66
Cause & Solution
L There is something wrong with the unit. Contact our service
personnel.
L There is something wrong with the carriage sensor. Contact our
service personnel.
L There is something wrong with the drum unit. Replace the drum
unit and the toner cartridge (page 75).
L The document was not fed into the unit properly. Re-insert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (page 86) and try again.
L The drum unit is not inserted properly. Re-insert it correctly (page
15).
L The memory (telephone numbers, parameters, etc.) has been
erased. Re-program.
L Recording paper was not fed into the unit properly. Re-insert the
recording paper (page 80).
Note:
L "#1": Paper input tray
L "#2": Manual input tray
L The ADF cover is open. Close it.
L There is no space to store new items in navigator directory. Erase
unnecessary items (page 32).
L The drum life is near to an end. Replace the drum unit as soon as
possible (page 75).
L The unit has a document in memory. See the other displayed
message instructions to print out the document. For fax memory
capacity, see page 88.
L If feature #442 is set to "ALWAYS" (page 63), check the connection
between the computer and the unit.
L Copying has stopped due to a lack of recording paper or
misfeeding of recording paper. See the other displayed message
instructions to continue copying.
L The inside of the unit is extremely cold and cannot be operated.
Use the unit in a warmer area. While the unit cannot be operated,
the received documents are temporarily stored into the memory,
and will be printed out automatically when the unit warms up.
L When performing memory transmission, the document being
stored exceeded the memory capacity of the unit. Send the entire
document manually.
L When making a copy, the document being stored exceeded the
memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.
Advertisement
Table of Contents
