Table of Contents
Advertisement
5
Press {STOP} to exit.
4.2.3 Erasing specific caller
information
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {<}.
L To cancel erasing, press {STOP}.
4
Press {SET}.
L To erase other items, repeat steps 2 to 4.
5
Press {STOP} to exit.
4.3 Storing caller
information
L Keep the front cover page open for button
locations.
4.3.1 Into the one-touch dial
feature and navigator directory
Important:
L This feature is not available if the caller
information does not include a telephone
number.
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {MENU}.
4
Select the station key or navigator directory.
For stations 1–3:
1. Press the desired station key.
2. Press {V} or {^} repeatedly to select
"DIAL MODE".
3. Press {SET}.
4. Press {SET}.
For stations 4–7:
1. Press the desired station key.
2. Press {SET}.
For stations 8–14:
1. Press {LOWER}, then press the desired
station key.
2. Press {SET}.
For navigator directory:
1. Press {<} or {>}.
2. Press {SET}.
5
Press {SET}.
Note:
L You can confirm the stored items by printing
the telephone number list (page 87).
L The unit can only store a name of up to 16
characters long.
L To edit a name or number, see page 32.
L If caller information does not include the
caller's name, enter the name manually. See
the instructions on page 31.
L If you assign an item to a station key which
already contains an item, the previous item
will be replaced.
L Station 1 to 3 can be used alternatively as
broadcast keys (page 34).
4. Caller ID
43
Advertisement
Table of Contents
