Table of Contents
Advertisement
7. Programmable Features
Feature/Code
Changing the fax
activation code
{#}{4}{3}{4}
Setting the auto
disconnection
{#}{4}{3}{5}
Changing the silent fax
recognition ring setting
{#}{4}{3}{6}
Setting the memory
reception alert
{#}{4}{3}{7}
62
Selection
If you wish to use an extension telephone to receive faxes, activate this
feature and program the activation code.
Important:
L The fax activation code must be different from the code that
you programmed on the answering machine.
{0} "OFF"
{1} "ON" (default)
1. Press {MENU}.
2. Press {#}, then {4}{3}{4}.
3. Press {1} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
To answer a call with an extension telephone in TEL/FAX mode (page
37), activate this feature and program the code.
{0} "OFF"
{1} "ON" (default)
1. Press {MENU}.
2. Press {#}, then {4}{3}{5}.
3. Press {1} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9 and {*}.
L The default code is ";0".
6. Press {SET}.
7. Press {MENU}.
To change the number of times the unit rings while in TEL/FAX mode.
{3} "3" (default)
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
Note:
L See page 37 for details.
To alert you with a beeping sound when a received fax document is
stored into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and
make sure the unit is supplied with enough paper to print the stored
document.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will be alerted to a reception problem by a
beeping sound.
Advertisement
Table of Contents
