Table of Contents
Advertisement
2. Preparation
2 Preparation
Connections and Setup
2.1 Connections
Plug in the mains lead and the telephone line
cord. (Switch on AC mains outlet.)
Caution:
L The mains lead must remain connected at
all times.
L Never install telephone wiring during a
lightning storm.
L When you operate this product, the power
outlet should be near the product and
easily accessible.
L Be sure to use the telephone line cord
included in this unit.
L Do not extend the telephone line cord.
1 Telephone line cord
L Connect to telephone network.
2 Mains lead
L Connect to Household Mains Supply
(220 – 240 V, 50 Hz).
3 [EXT] socket
L You can connect an answering machine
or an extension telephone. Remove the
stopper if attached.
4 Answering machine (not included)
5 Handset unit (Optional) connection socket
L You can connect the optional handset
unit. Remove the seal if attached.
Extension telephone
adaptor (not included)
22
5
3
4
1
2
Note:
L To avoid malfunction, do not position the unit
near appliances such as TVs or speakers
which generate an intense magnetic field.
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
L If you use the unit with a computer and your
internet provider instructs you to install a filter
(6), please connect it as follows.
Using the optional handset unit
You can add the optional handset unit (Model
No. KX-FA103X). See page 12 for accessory
information.
L Connect to the handset unit connection
socket (5) before use. For more details,
please refer to the installation guide for the
optional handset unit.
6
Advertisement
Table of Contents
