Table of Contents
Advertisement
Display
"MODEM ERROR"
"NO FAX REPLY"
"OUT OF PAPER
INPUT TRAY #1"
"PAPER JAMMED"
"OPEN TOP COVER"
"PC FAIL OR BUSY"
"PLEASE WAIT"
"POLLING ERROR"
"REDIAL TIME OUT"
"REMOVE DOCUMENT"
"REMOVE PAPER IN
INPUT TRAY #2"
"REPLACE DRUM"
"CHANGE SUPPLIES"
"RX MEMORY FULL"
"TONER EMPTY"
"CHANGE SUPPLIES"
"TONER LOW"
"CHANGE SUPPLIES"
"TOP COVER OPEN"
"TRANSMIT ERROR"
"WARMING UP"
Cause & Solution
L There is something wrong with the unit's modem. Contact our
service personnel.
L The other party's fax machine is busy or has run out of recording
paper. Try again.
L Recording paper is not installed or the input tray has run out of
paper. Install paper (page 19, 20).
L Recording paper is not fed into the unit properly. Reinstall paper
(page 19, 20).
L The paper input tray is not installed or is not inserted completely.
Insert the paper input tray into the unit.
Note:
L "#1": Paper input tray
L "#2": Manual input tray
L A recording paper jam occurred. Clear the jammed paper (page
78).
L The cable or the computer mains lead is not connected correctly.
Check the connections (page 48).
L The software is not running on the computer. Restart the software
and try again.
L The unit is warming up. Wait for a while.
L The other party's fax machine does not offer the polling function.
Check with the other party.
L The other party's fax machine is busy or has run out of recording
paper. Try again.
L The document is jammed. Remove the jammed document (page
81).
L Attempted to send or copy a document longer than 600 mm using
the auto document feeder. Press {STOP} to remove the document.
Divide the document into two or more sheets and try again.
L The recording paper is installed in the manual input tray when
trying to copy, receive faxes or print reports. Remove the recording
paper from manual input tray.
L The drum unit's service life is finished. Replace the drum unit
immediately (page 75).
L The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 19)
or clear the jammed paper (page 78).
L If feature #442 is set to "ALWAYS" (page 63), check the connection
between the computer and the unit.
L The toner's service life is finished. Replace the toner cartridge
immediately (page 75).
L The toner life is near to an end. Replace the toner cartridge as
soon as possible (page 75).
L The top cover is open. Close it.
L A transmission error occurred. Try again.
L The inside of the unit is cold. Let the unit warm up. Wait for a while.
8. Help
67
Advertisement
Table of Contents
