Table of Contents
Advertisement
1. Introduction and Installation
5
Insert the paper input tray into the unit.
Note:
L If the paper is not loaded correctly, re-adjust
the paper guides, or the paper may jam.
L If the paper input tray does not close, the
plate in the paper input tray may be lifted.
Push the paper and make sure that the paper
is laid flat in the paper input tray.
Caution for the paper input tray
L Do not drop the input tray.
L Hold the paper input tray with both hands
when removing or installing. The input
tray weights approximately 2 kg when the
recording paper is fully installed.
Approx. 2 kg
20
1.9.2 Using the manual input tray
You can print not only on plain paper but also on
special media (transparencies / labels /
envelopes).
The manual input tray is used only for printing
with the computer (page 50) and can hold one
page at a time. When printing multiple pages,
add a next page after the first page has been fed
into the unit.
L Please refer to page 89 for information on
recording paper.
Load the recording paper after you have
started printing with the computer.
1
Pull open the manual input tray (1), and
then raise the extender (2) gently until it
clicks into place.
1
2
Advertisement
Table of Contents
