Using The Unit As A Scanner - Panasonic KX-FLB801E Operating Instructions Manual

L Envelopes that use encapsulated types of
adhesive that do not require moistening but
rely on pressure to seal them
Clasp Transparent window
6. Multi-Function Station software
Scanning
6.5 Using the unit as a
scanner
L Keep the front cover page open for button
locations.
6.5.1 Using Multi-Function
Viewer
1
Set the original.
Using the auto document feeder
Insert the document (up to 40 pages) FACE
UP into the feeder until a single beep is
heard.
L Confirm that there are no documents on
the scanner glass.
Using the scanner glass
Place the document FACE DOWN on the
scanner glass, aligning the top left corner of
the document to the l mark on the unit.
L Confirm that there are no documents in
the auto document feeder.
2
Start Multi-Function Station.
3
Select [Viewer(Scan)].
L [Multi-Function Viewer] will appear.
4
Click the [Scan] icon in the [Multi-Function
Viewer] window.
L The [Panasonic KX-FLB801E] (default
name) dialogue box will appear.
5
If necessary, change the scanning settings
on your computer.
L To preview the scanned image, click
[Preview]. Only the first page will be
displayed. You can drag the frame to
specify the scanned area. If you change
the scan mode, brightness, or contrast
setting, click [Preview] to refresh the
scanned image. If you use the auto
document feeder, set the document again
before refreshing the scanned image.
L If you select [B/W Graphic] for scan
mode, the resolution range will be from
150 to 600 dpi.
6
Click [Scan].
L If you preview the scanned image using
the auto document feeder in step 5, set
the document again and click [Scan].
L The scanned image will be displayed in
the [Multi-Function Viewer] window
after scanning.
53