Help; Error Messages - Display - Panasonic DP-MC210 Quick Reference Manual

3. Help

3 Help Error Messages
3.1 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
"Access Error"
"Call Service"
"Change Supplies Toner
Empty"
"Change Supplies Black
:Empty"
"Change Supplies Toner
Low"
"Change Supplies Black
:Low"
"Change Supplies
Replace Waste Toner"
"Change Supplies
Replace Waste Toner
Cartridge"
"Change Supplies Waste
Toner Full"
"Check Document"
"Check Install Input
Tray #1"
"Check Paper"
16
Cause & Solution
L The access to an SD card did not work correctly due to some existing
problem. Press {Stop} to clear the message, or remove the SD card, and
then try again.
L There is something wrong with the unit. Contact our service personnel.
L The toner cartridge life is finished. Replace the toner cartridge immediately.
Note:
L "Black": Black toner
L "Cyan": Cyan toner
L "Magenta": Magenta toner
L "Yellow": Yellow toner
L The toner cartridge life is near its end. Replace the toner cartridge as soon
as possible.
Note:
L "Black": Black toner
L "Cyan": Cyan toner
L "Magenta": Magenta toner
L "Yellow": Yellow toner
L The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately.
L The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
L The document was not fed into the unit properly. Remove the document,
and then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers and try
again.
L The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
Note:
L "#1": Standard input tray
L "#2": Optional input tray
L "#1+#2": Standard input tray and optional input tray
L You are printing on envelopes. Check the standard input tray to be sure that
envelopes are installed, and then press {Black}/{Color}.
L The recording paper size is not the same as the size selected for copy.
Change the recording paper size setting (feature #380 or feature #382), and
install the appropriate recording paper.
L The recording paper size is not the same as the size selected when printing
from the PC. Change the recording paper size setting (feature #380 or
feature #382), and install the appropriate recording paper.
L The recording paper size is not the same as the size selected for receiving
a fax. Change the recording paper size setting (feature #380 or feature
#382), and install the appropriate recording paper.
Detailed operating instructions are on the CD-ROM.