Table of Contents
Advertisement
Feature/Code
Setting the Caller ID list to
print automatically
{#}{2}{1}{6}
Setting the recording
paper size in the paper
input tray
{#}{3}{8}{0}
Setting the waiting time
for the power save mode
{#}{4}{0}{3}
Saving the previous
contrast setting
{#}{4}{6}{2}
Setting the default
operation mode
{#}{4}{6}{3}
Setting the default
operation mode timer
{#}{4}{6}{4}
Setting toner save feature
{#}{4}{8}{2}
Selection
{0} "OFF" (default): The unit will not print the Caller ID list, but will
keep records of the information for the last 30 callers.
{1} "ON": The unit will print the Caller ID list automatically after every
30 new calls (page 41).
{1} "LETTER": Letter size paper
{2} "A4" (default): A4 size paper
{3} "LEGAL": Legal size paper
To set the length of time before the unit enters the power save mode.
{1} "5min": 5 minutes
{2} "15min" (default): 15 minutes
{3} "30min": 30 minutes
{4} "1h": 1 hour
Note:
L During the power save mode, the unit needs to preheat the fuser
unit before printing.
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The unit will save the previous contrast setting.
To select the default operation mode when the selected time of the
mode timer (feature #464) passes.
{1} "COPY" (default): Copy mode is selected as default.
{2} "FAX": Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature
#463).
{0} "OFF": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner
consumption.
7. Programmable Features
59
Advertisement
Table of Contents
