Panasonic KX-FLB801E Operating Instructions Manual page 53

For details about the [Print] dialogue
box, click [?], then click the desired item.
Note:
L For Microsoft PowerPoint
[Color] or remove the check next to
[Grayscale] in the print dialogue so that
coloured text will be printed in grayscale.
3
Select [Panasonic KX-FLB801E] as the
active printer.
L If you have changed the name of the unit
when installing, select that name from the
list.
L To change the printer settings, proceed
as follows.
For Windows 98/Windows Me:
Click [Properties], and then click the
desired tab. Change the printer settings,
and then click [OK].
For Windows 2000:
Click the desired tab and change the
printer settings.
For Windows XP:
Click [Preferences], and then click the
desired tab. Change the printer settings,
and then click [OK].
4
Click [Print] or [OK].
L The unit will start printing.
Note:
L To load paper, see page 19, 20.
L When using the manual input tray, load the
recording paper after step 4.
L For details about the paper specifications,
see page 51, 89.
Setting the printer properties
You can change the printer setting in step 3. We
recommend that you test paper (especially
special sizes and types of paper) on the unit
before purchasing large quantities.
®
, select
6. Multi-Function Station software
You can change the settings on the following
tabs.
Paper: Paper size, paper type, etc.
Output: Pages per sheet, etc.
Quality: Graphics mode, resolution, toner save
feature, etc.
Note:
L To select [Envelope] for paper type on the
[Paper] tab, you need to select [Envelope
#10] or [Envelope DL] for paper size.
L When printing from a computer, the toner
save feature on the [Quality] tab overrides
the unit's toner save setting (feature #482 on
page 59).
6.4.2 Transparencies
Use transparencies designed for laser printing.
We recommend the following:
®
3M CG3300/CG5000
L Use the manual input tray to print
transparencies.
L Load transparency sheets one page at a
time for printing, print-side down.
L Remove each transparency after printing
and place it on a flat surface to cool and to
prevent it from curling.
L Do not re-use transparencies that have
already been fed through the unit. This
includes transparencies that have been fed
through and ejected without being printed on.
L Some types of transparencies have
instructions recommending which side to
print on. If the print quality is poor, try printing
on the other side.
6.4.3 Labels
Use labels designed for laser printing. We
recommend the following:
®
Avery
5160/5161/5162/5163/5164/5165/5167/5168
®
XEROX
LWH100/LWH110/LWH120/LWH130/LWH140
L Use the manual input tray to print labels.
L Load label sheets one page at a time for
printing, print-side down.
L Remove each label after printing.
L Do not use the following types of labels:
– Labels that are wrinkled, damaged or
separated from the backing sheet.
– Any sheet of labels that has spaces in it
where some of the labels have been
removed.
51