Table of Contents
Advertisement
1. Introduction and Installation
If the top part of the extender is detached
1. With the top part of the extender in the open
position, insert the tab (1) into the left hole
(2) of the extender.
2. Slide the other tab (1) into the right hole (2)
of the extender from below until it clicks into
place.
18
2
1
2
1
If the extender is detached
1. Line up the extender (1) with the left side of
the output tray. Make sure that the triangles
(2) match to attach the extender correctly.
1
2
2. Snap the extender (1) into the unit by
pushing down the right side of the extender.
1
Advertisement
Table of Contents
