Infrared Transmission; Irda Mobile - Microtek SCAN-IN-DEX 1000 User Manual

Infrared Transmission

Scan-in-Dex can use infrared transmission to export card information to mobile phone
devices or palm products.

IrDA Mobile

The ways to switch on the mobile phone infrared transmission mode are transfer from
Scan-in-Dex Manager and transfer from Microtek Scan-in-Dex. The infrared transmitter
and receiver are not supplied by Microtek.
A. Microtek Scan-in-Dex
1. Launch the mobile phone infrared
function first, then choose «File /
IrDA / Mobile phone» from Microtek
Scan-in-Dex.
2. From the pop-up dialog box, click
«Selected», Only those data you
selected from the card list is
exported. If you click «All», all card
data is exported.
3. When the following screen appear
during transmission, you can choose
to export to a mobile phone or to a
SIM card.
4. When finished with choosing or
changing, click «OK» to export data
from the mobile phone.
Note: For the latest update on infrared
transmission mobile phones supported
by Scan-in-Dex, please check the
Microtek Technology website at http://
www.microtek.com
32 Microtek Scan-in-Dex User Guide
B. Scan-in-Dex Manager
1. Launch the mobile phone infrared
function first, then check to choose
«IrDA Mobile» from the menu bar of
the Scan-in-Dex Manager.
2. Aim the computer's infrared receiver
at the mobile phone's infrared, then
scan a card with Scan-in-Dex. After
the card recognition completes, an
edit screen will appear. You can then
change the data content and click
«OK». The card data will be saved to
the mobile phone.
Note: If you do not want the edit
screen to appear after card
recognition is completed, choose
"Setting" from the menu bar of the
Scan-in-Dex Manager, and unclick
"Edit data before export".