Replacing The Staples; To Replace The Staple Cartridge For Finisher Fs-501 - Konica Minolta BIZHUB C250P User Manual

7
7.2

Replacing the staples

When Finisher is installed and is about to run out of staples, the message
shown below appears.
!
Detail
Be sure to replace the staple cartridge only after the message appears,
otherwise the machine may be damaged.

To replace the staple cartridge for Finisher FS-501

1
Slide the finisher away from the
machine.
2
Turn the jammed-staple-clearing dial
to the left in order to position stapler
at the center.
7-8
Replacing consumables
bizhub C250P (Phase 3)