Konica Minolta BIZHUB C250P User Manual page 133

Setting up the printer driver
– IPX Setting: Select "ON".
– Ethernet Frame Type: Select "Auto Detect". (Select the frame type
according to the network environment.)
– NetWare Print Mode: Select "Nprinter/Rprinter".
– Printer Name: Specify the printer name.
– Printer Number: Specify the printer number (0-255). When 255 is
specified, the setting is "Auto".
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that "C250P" (the created printer) is shown as "Waiting for
Job" for the connected printer (0).
Note
For queue user privileges, the printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.
Reminder
When turning the machine off, wait for 10 seconds or longer before
turning it on again; otherwise the machine may not function normally.
bizhub C250P (Phase 3)
3
3-59