Konica Minolta BIZHUB C250P User Manual page 135

Setting up the printer driver
– IPX Setting: Select "ON".
– Ethernet Frame Type: Select "Auto Detect". (Select the frame type
according to the network environment.)
– NetWare Print Mode: Select "Pserver".
– Print Server Name: Specify the print server name created in step 4.
– Print Server Password: Specify only when setting from the NetWare
server. (Displayed by "----".)
– Polling Interval: Specify "1". (Change as necessary.)
– Bindery/NDS Setting: Select "NDS".
– NDS Context Name: Specify the name of the context that connects
to Pserver.
– NDS Tree Name: Specify the name of the tree that Pserver logs on
to.
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection
column, check that the created Pserver is connected.
Note
For queue user privileges, the printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.
Reminder
When turning the machine off, wait for 10 seconds or longer before
turning it on again; otherwise the machine may not function normally.
bizhub C250P (Phase 3)
3
3-61