Konica Minolta BIZHUB C250P User Manual page 338

6
Standard-sized paper:
Paper Source
Bypass tray
Tray 1
Tray 2
Single/Double paper feed
cabinets
LCT
Double-sided prints
Finisher FS-603
Finisher FS-501
Job separator JS-601
Finisher FS-514
Output Tray OT-601
Saddle Stitcher SD-503
Mailbin Kit MT-501
Print exit tray (standard)
*1
There are five Foolscap sizes: 220 × 330 mm, 8-1/2 × 13 w, 8-1/4 × 13 w,
8-1/8 × 13-1/4 w and 8 × 13 w. Any one of these sizes can be selected. For
details, contact the technical representative.
*2
Can be used when optional punch kit is installed on Finisher.
6-4
Paper Size
A3 w to B6 w, A6 w, A3 Wide (12-1/4 × 18 w),
11 × 17 w to 5-1/2 × 8-1/2 w/v, 8 × 13 w
A3 w to B6 w, A6 w, A3 Wide (12-1/4 × 18 w),
11 × 17 w to 5-1/2 × 8-1/2 w/v, 8 × 13 w
A3 w to A5 w, 11 × 17 w to 8-1/2 × 11 w/v
A4 v
A3 w to A5 w, A3 Wide (12-1/4 × 18 w),
11 × 17 w to 5-1/2 × 8-1/2 w, 8-1/2 × 13 w
Exit tray 1:
"Group" setting: A3 w to B5 w/v, A3 Wide (12-1/4 × 18 w)
"Sort" setting: A3 w to A5 v
"Staple" setting: A3 w to B5 w/v
Exit tray 2: A3 w, B4 w, B5 w
Exit tray 1:
"Group"/"Sort" setting: A3 w to B5 w/v,
A3 Wide (12-1/4 × 18 w)
Exit tray 2:
"Offset/Group" setting, "Offset/Sort" setting:
A3 w to B5 w/v, A3 Wide (12-1/4 × 18 w)
"Staple" setting: A3 w to B5 w/v
A3 w to B5 w/v
Finishing tray 1, 2 and optional Output Tray
A3 w to B6 w, A6 w, A3 Wide (12-1/4 × 18 w)
"Group"/"Sort" settings: A3 w to A5 w
Staple settings: A3 w to A5 w
*2
Punch settings : A3 w, A4 w, A5 w
Fold & staple: A3 w, B4 w, A4 w, B5 w
A4 v, B5 v, A5 w
A3 w to B6 w, A6 w, A3 Wide (12-1/4 × 18 w),
11 × 17 w to 5-1/2 × 8-1/2 w/v
Loading copy paper
*1
*1
*1
bizhub C250P (Phase 3)