Konica Minolta BIZHUB C250P User Manual page 324

5
Time Adjustment
Parameters
NTP Setting
NTP Server Add.
Port No.
System Setting
Parameters
Daylight Saving
Auto Reset
Date/Time Setting
Set Date
!
Detail
"Set Date" appears only if "Time Adjustment" in the "Admin. Setting"
menu is set to "ON".
If "Enhanced Security" is set to "ON", the administrator is logged off from
Administrator mode according to the time specified for "Auto Reset".
5-44
Description
Select whether or not the time is obtained
through NTP.
Specify the IP address or DNS name of the
NTP server.
Specify the receiving port number for NTP.
Description
Select whether or not the machine's internal
clock observes daylight saving time, and
specify the time difference for daylight saving
time between 1 and 150 minutes.
Specify the setting (between 1 and 9 minutes
or "OFF") for the desired length of time until
the automatic system reset operation is per-
formed.
Specify the date, time and time zone for the
machine's internal clock.
"Set Date" appears only if "Time Adjustment"
in the "Admin. Setting" menu is set to "ON".
Control panel settings
Initial Setting
ON
—
123
Initial Setting
OFF
1 Min.
—
—
bizhub C250P (Phase 3)