Center Binding - Konica Minolta BIZHUB C250P User Manual

4

Center Binding

You can specify to center staple and fold a printed document.
1
Click the Layout tab.
2
From the "Center Staple and Fold" drop-down list, select "Center
Staple and Fold".
3
To avoid printing on the folded part of the document, select the "Center
Erase" check box.
Note
"Center Staple and Fold" cannot be specified if "Staple" or "Punch" has
been selected.
"Center Staple and Fold" is available if optional finisher FS-603 or if
saddle stitcher SD-503 is installed on optional finisher FS-514 is installed.
"Center Erase" is available only if finisher FS-603 is installed.
The available center binding and folding settings differ depending on the
finisher that is installed. When FS-514 is installed, in addition to "Fold &
Staple" (which folds the documents in half before stapling them), "Center
Staple" (which binds documents with staples at the center) and "Fold"
(which folds documents in half) are available. When FS-603 is installed,
only "Center Staple and Fold" is available.
4-70
Specifying printer driver settings
bizhub C250P (Phase 3)