Konica Minolta BIZHUB C250P User Manual page 297

Control panel settings
Note
If the entered administrator password is incorrect, the message
"Password failure Please wait." appears, and the "Admin. Setting" menu
does not appear.
If administrator authentication failed, causing the message "Password is
not valid" to appear and preventing any operation from being performed,
restart the machine.
After network settings are changed, the message "Completed. Turn
power off." appears. To apply the new settings, turn the machine off, then
on again.
When turning the machine off, then on again, wait at least 10 seconds to
turn the main power switch on after turning it off. The machine may not
operate correctly if it is turned on immediately after being turned off.
bizhub C250P (Phase 3)
5
5-17