O.w. Priority - Konica Minolta BIZHUB C250P User Manual

5

O.W. Priority

Select the priority setting for overwriting temporary data when the security
kit is installed. Select "Encryption" to perform high-level security encryption
processing. However, data overwriting with encryption of the HDD differs
depending on whether "Mode 1" or "Mode 2" is selected. Normally,
"Encryption" is selected.
If "Overwrite" is selected, data overwriting with encryption of the HDD is
performed depending on whether "Mode 1" or "Mode 2" is selected. Select
this setting when the format of the data written to the HDD is considered
important.
1
In the O.W. Priority screen, select "Encryption" or "Overwrite".
2
When the "Encryption" or "Overwrite" setting is changed, follow the
instructions in the screen to restart the machine.
3
If an encryption key error appears, select the parameter from the
Admin. Setting screen to format the HDD.
!
Detail
When the "Encryption" or "Overwrite" setting is changed, the HDD must
be formatted.
Reminder
When turning the machine off, then on again, wait at least 10 seconds to
turn the main power switch on after turning it off. The machine may not
operate correctly if it is turned on immediately after being turned off.
5-52
Control panel settings
bizhub C250P (Phase 3)