Specifying printer driver settings
Hole punching
Holes can be punched into the printed document.
1
Click the Layout tab.
2
From the drop-down list, select "4 Holes" as the number of punched
holes.
Note
The hole punch function is available only when optional finisher FS-603
and punch kit PK-501 are installed or when optional finisher FS-514 and
punch kit PK-510 are installed.
Note
Depending on the selected Binding Position setting, different hole-
punching positions are available.
bizhub C250P (Phase 3)
4
4-71