Setting Up the PostScript Driver (Windows)
Center Binding
You can specify to center staple and fold a printed document.
1
Click the Layout tab.
2
From the "Center Staple and Fold" drop-down list, select "Center Sta-
ple and Fold".
3
To avoid printing on the folded part of the document, select the "Center
Erase" check box.
Note
The center binding function is available only when optional finisher FS-
603 is installed.
Hole Punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finisher FS-603 and
punch kit PK-501 are installed.
1
Click the Layout tab.
2
From the "Hole-Punch" drop-down list, select the number of punched
holes.
Note
Depending on the selected Binding Position setting, different hole-
punching positions are available.
C250
6
6-20