Network Connection Methods That Can Be Selected In Each Windows Operating System - Konica Minolta BIZHUB C250P User Manual

2
Network connection methods that can be selected in each
Windows operating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (SMB, LPR, or IPP printing). Select the best method of network printing
for your Windows environment.
Network printing from a Windows operating system
SMB Print-
ing
LPR Print-
ing
IPP Print-
ing
Port 9100
Printing
Reminder
Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to "Installing the printer driver" on
page 2-7.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary. For an IPP connection, it is neces-
sary to install the printer driver first.
When using Port 9100 to print under Windows 98SE or Windows Me, the
Peer to Peer Printing Tool must be installed.
2-32
Protocol Win- Win-
Used dows dows
98SE Me
TCP/IP, o o
NetBEUI
TCP/IP
TCP/IP
TCP/IP + +
Setting up the printer driver
Win- Win- Win-
dows dows XP dows NT
2000 4.0
o o
o o o
o o
o o
Win-
dows
Server
2003
o
o
o
o
C250P