Konica Minolta BIZHUB C250P User Manual page 46

1
No. Part Name
6 Paper Feed Cabinet PC-403
7 Finisher FS-603
8 Punch Kit PK-501
9 Finisher FS-501
10 Job Separator JS-601
11 Mount Kit MK-706*
12 Local Interface Kit EK-702*
13 Dehumidifer Heater 1C*
14 Hard Disk Drive HD-501*
15 Security Kit SC-503*
* Parts marked with an asterisk (*) are internal options and therefore are not shown in the illustra-
tion.
Reminder
In order to maintain the functionality and quality of the machine, be sure
to use the desk or paper feed cabinet when installing the machine on the
floor.
1-24
Installation and operation precautions
Description
Can be loaded with up to 2,500 sheets of paper
Referred to as the "LCT" throughout the manual.
Feeds out printed pages. The "Offset" setting (sep-
arating), Staple settings (stapling), and "Fold & Sta-
ple" function (binding) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the sin-
gle paper feed cabinet, or on the double paper
feed cabinet.
Allows hole punching to be used if installed onto
Finisher FS-603.
Referred to as the "punch kit" throughout the man-
ual.
Finishes printed pages according to the selected
Output setting (sorting or stapling), then feeds out
the pages.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, or on the
single paper feed cabinet or the double paper
feed cabinet.
Copy exit tray installed on Finisher FS-501
Referred to as the "job separator" throughout the
manual.
Required to mount the local interface kit.
Used for making a local connection between this
machine and the computer.
Installed in the paper feed cabinet or desk to pre-
vent humidity from collecting in the paper.
Operations using the "Secured Print" and "Save in
User Box" settings can be used if the hard disk
drive is installed.
Referred to as the "HDD" throughout the manual.
Installed to encode the data saved on the hard disk
so that the hard disk can be used more safely.
C250P