Punching Holes In Prints (Punch Settings) - Konica Minolta BIZHUB C250P User Manual

Loading copy paper

Punching holes in prints (Punch settings)

!
Detail
In order for holes to be punched in the prints, all of the following condi-
tions must be met.
The paper width must be between 280 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
Note
Holes can be punched in copies that are fed out only if Finisher FS-603
and Punch Kit PK-501 are installed.
Paper Weight
2
60 g/m to 209 g/m
C250P
Paper Size
2
A3 w, A4 v
5
5-29