Konica Minolta BIZHUB C250P User Manual page 278

4
IPP
SNMP
AppleTalk
PSWC Setting
I/F Setting
Parameters
Parallel Timeout
Network Timeout
USB Timeout
Parallel I/F
IEEE 1284/USB
4-32
Parameters
IPP Setting
Accept IPP Job
Printer Name
Printer Location
Printer Info.
Support Info.
SNMP Setting
Read Community
Write Community
AppleTalk Set
Printer Name
Zone Name
Description
Specify the length of time until a transmission
timeout occurs.
Specify the length of time until a transmission
timeout occurs.
Specify the length of time until a transmission
timeout occurs.
Specify the mode for using a parallel inter-
face.
Select whether a parallel or USB interface is
used.
Description
Select whether or not IPP printing is
enabled.
Select whether or not user IPP jobs
are allowed.
Specify the name of the printer.
Specify the location of the printer.
Specify the printer information.
Specify the print operations sup-
ported by IPP.
Select whether or not the SMB
printing (Windows printing) service
is enabled.
Specify the name of the Read com-
munity.
Specify the name of the Write com-
munity.
Select whether or not AppleTalk is
enabled.
Specify the name of the printer.
Specify the zone name.
Select whether or not operations
using PageScope Web Connection
are possible.
Control panel settings
Initial Setting
Enable
Enable
—
—
—
—
Enable
—
—
Disable
—
—
Enable
Initial Setting
15 sec.
15 sec.
15 sec.
ECP
USB
C250P