Stapling; Hole Punching - Konica Minolta BIZHUB C250P User Manual

Specifying printer driver settings

Stapling

Multiple-page documents can be stapled.
1
Click the Setup tab.
2
Select the "Staple" check box.
3
From the drop-down list, select the number of staples and the stapling
position.
Note
The staple function is available only when the optional Finisher FS-501 or
FS-603 is installed.
Note
Depending on the selected Binding Position setting, different stapling po-
sitions are available.
Number of pages that can be stapled when FS-501 is installed: Up to 30
pages. Number of pages that can be stapled when FS-603 is installed:
Up to 50 pages on A4 w or smaller plain paper, and up to 25 pages on
B4 or larger paper.

Hole punching

Holes can be punched into the printed document.
1
Click the Setup tab.
2
Select the "Hole-Punch" check box.
3
From the drop-down list, select four holes are to be punched.
Note
The hole punch function is available only when optional Finisher FS-603
is installed. When using optional Finisher FS-603, the punch kit must be
installed.
C250P
3
3-17