Specifying Client (Windows) Settings When Using The Netware Server - Konica Minolta BIZHUB C250P User Manual
Hide thumbs
Also See for BIZHUB C250P:
- User manual (538 pages) ,
- Service manual (422 pages) ,
- System administrator manual (52 pages)
Table of Contents
Advertisement
2
Specifying client (Windows) settings when using the NetWare server
1
For Windows 98SE/Me/2000/NT 4.0, click the [Start] button, point to
"Settings", and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
–
If "Printers and Faxes" is not displayed in the Start menu, click
"Control Panel" in the Start menu, double-click "Printers and Other
Hardware", and then double-click "Printers and Faxes".
2
For Windows 98SE/Me/2000/NT 4.0/Server 2003, double-click the
"Add Printer" icon.
For Windows XP, click "Add a printer" on the "Printer Tasks" menu.
The Add Printer Wizard starts up.
3
In the port settings, browse the network, and specify the name of the
created queue (or NDPS printer name).
4
In the "Printer Model" list, specify the folder on the CD-ROM that con-
tains the printer driver for the operating system used.
–
For Windows 98SE/Me
Konica Minolta PCL driver: Folder at Driver\Drivers\bizhubC250 on
the User Software CD-ROM
PostScript driver: Folder at Driver\PSPPD on the PostScript Printer
Driver CD-ROM
–
For Windows NT4.0/2000/XP/Server 2003
Konica Minolta PCL driver: Folder at Driver\Drivers\bizhubC250 on
the User Software CD-ROM
PostScript driver: Folder at Driver\Drivers on the PostScript Printer
Driver CD-ROM
5
Follow the on-screen instructions to complete the installation.
2-60
Setting up the printer driver
C250P
Advertisement
Table of Contents
Troubleshooting
