Setting up the printer driver
Printing with Macintosh
Operations on this machine
Set the IP address for this machine. For the setting procedure, refer to
"Specifying the TCP/IP settings" on page 2-34.
In PageScope Web Connection, specify the settings described below for Ap-
pleTalk.
1
Start up PageScope Web Connection.
2
Click the [Admin Mode] button.
3
Enter the administrator password, and log in to Administrator mode.
4
On the Network tab, click "AppleTalk".
.
5
Specify settings for the following:
–
AppleTalk: Set whether to use AppleTalk. Select "Enable" here.
–
Printer Name: Specify the printer name (up to 32 alphanumeric
characters).
–
Zone Name: Specify the zone being connected to (up to 31 alpha-
numeric characters).
C250P
2
2-61