Changing Ftp Setting - Konica Minolta 7145 Instruction Manual
Network setup and scanner operations
Hide thumbs
Also See for 7145:
- Internet fax / fax operations (453 pages) ,
- Service manual (448 pages) ,
- Instruction manual (324 pages)
Table of Contents
Advertisement
5-7. FTP Configuration
Changing FTP Setting
The following FTP settings may be changed as noted.
Proxy Server Address
Proxy Server Port Number
Enable PASV Mode
FTP Client Port Number
FTP Server Connection Timeout
To alter any of these FTP settings, follow these steps:
1
Open the FTP configuration page.
2
In the FTP Settings section, select the field you wish to change.
3
Enter the new settings.
4
At the bottom of the page, type in the system password in the provided field.
5
Click [Apply].
● Changes do not take effect until you start the copier. Be sure to wait at least 10 seconds after turning off
the main power switch before you turn the copier back on.
II Network Setup - Administrators only
Chapter 5 Web Utility
92
Advertisement
Table of Contents
