Scan Mode; File Format; Scan Quality - Konica Minolta 7145 Instruction Manual

6-4. Scanning Documents

Scan Mode

Select either [Two-sided] or [One-sided] for the document to be scanned with the [SCAN MODE].

File Format

Select either [TIFF] or [PDF] as the file format for the scan data.

Scan Quality

Select the scan quality from [600dpi], [400dpi], [300dpi] and [200dpi].
Below are the approximate number of pages of A4-size documents that can be scanned at one time
with the standard memory (8 MB).
Reso-
Document
lution
Text only*1
600dpi
With images*2
Text only*1
400dpi
With images*2
Text only*1
300dpi
With images*2
Text only*1
200dpi
With images*2
*1 When ITU-T fax chart No. 4 used
*2 When ITU-T fax chart No. 1 used
If the volume of the scanned data exceeds the capacity of the memory, the job will be registered as an error.
This limitation only applies if the optional hard disk is not installed. When the hard disk is installed, please refer to the
specifications page for further information on limitations.
● If an error occurs and the memory is full or the memory overflows, send via binary division.
III Scanner
Chapter 6 Using the Scanner Functions
TIFF Pages PDF Pages
approx. 24 approx. 16
approx. 8
approx. 44 approx. 29
approx. 18 approx. 12
approx. 67 approx. 44
approx. 33 approx. 22
approx. 119 approx. 79
approx. 64 approx. 40
132
approx. 6