Enable Netware; Ethernet Frame Type; Print Server Name - Konica Minolta 7145 Instruction Manual

4-4. NetWare Setup
NetWare setup (Part 1 of 3)
1
Access to [NetWare Setup] screen (1/3) from [Network setting] screen.
For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Use [

Enable NetWare

This sets whether or not to enable the machine's NetWare capabilities in the network environment.
1
To disable NetWare settings, touch the [OFF] key. To enable them touch the [ON] key.
[ON] :Used in the NetWare environment
[OFF] :Not used in the NetWare environment

Ethernet Frame Type

This sets the frame type used by the machine.
1
Touch the [EDIT] key on the [Ethernet Frame Type] screen.
[Auto-Sense]
[EDIT]
The factory default is [Auto-Sense].
2
Touch [OK] key.

Print Server Name

This sets the Print Server name assigned to the Network Controller.
1
Touch the [Print Server Name] key.
2
Using the [Data Input] screen, input the Print Server name.
3
Touch [OK] key.
→ The screen will return to [NetWare Setup].
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
Page 23).
] and [ ] to switch the screen.
:Automatic Setup
:Choose from below
[Auto-Sense]→[802.2]→[802.3]→[Ethernet II]→[802.2 SNMP]→[Auto-Sense]
34