Subnet Mask; Enable Tcp/Ip; Ip Address - Konica Minolta 7145 Instruction Manual

TCP/IP Setup (Part 1 of 3)
1
Access the [TCP/IP Setup] screen (1/3) from the [Network setting] screen.
For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Use [ ] and [

Enable TCP/IP

This sets whether to enable TCP/IP.
1
To disable TCP/IP settings, touch the [OFF] key on the LCD Screen. To enable them touch
the [ON] key.

IP Address

The IP Address is registered on the Network Controller.
1
Touch the [IP Address] key.
2
Use the keys on the control panel to input the IP Address.
Specify four sets of three digit numbers, separated by the periods as the IP Address.
When you touch
When using a DHCP server for IP Address management, the IP Address acquired with DHCP is displayed.

Subnet Mask

This inputs the subnet mask for the machine's network.
1
Touch the [Subnet Mask] key.
2
Use the keys on the control panel to input the subnet mask.
Specify four sets of three digit numbers, separated by the periods as the subnet mask.
When you touch
When using a DHCP server for subnet mask management, the subnet mask acquired with DHCP is displayed.
Page 23).
] to switch the screen.
the cursor moves to the left and right.
[ ] or [ ]
the cursor moves to the left and right.
[ ] or [ ]
27
Chapter 4 Setting from the Control Panel
4-3. TCP/IP Setup
II Network Setup - Administrators only