Enable Pop; Pop Server - Konica Minolta 7145 Instruction Manual

E-Mail (POP) Setup (Part 1 of 2)
1
Access to [E-Mail (POP) Setup] screen from [Network setting] screen.
For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Use [ ] and [

Enable POP

This setting enables the E-Mail reception.
1
Touch either the [ON] or [OFF] key on the [Enable POP] screen.
[ON] : Enables the E-mail capability
[OFF] : Disables the E-mail capability
The [ON] and [OFF] keys might not be displayed in some version.

POP Server

This sets the name of the POP server used for receiving E-mail.
1
Touch the [POP Server] key.
2
Using the [Data Input] screen, input the name or IP address of the POP server used for
receiving E-mail.
3
Touch [OK] key.
The SMTP server name is a combination of up to 239 symbols and alphanumerics.
For details on character input refer to [Chapter 3 Inputting Text] (
Login Name
This sets the login name used for connecting to the POP server.
1
Touch the [Login Name] key.
2
Using the [Data Input] screen, input the desired login name.
3
Touch [OK] key.
Page 23).
] to switch the screen.
63
4-9. E-Mail (POP) Setup
Page 15).
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel