Enable Ipp; Accept Ipp Job - Konica Minolta 7145 Instruction Manual

IPP setup (Part 1 of 4)
1
Access to [IPP Setup] screen (1/4) from [Network setting] screen.
For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Use [ ] and [

Enable IPP

This setting activates and deactivates IPP.
1
Touch either the [ON] or [OFF] key on the [Enable IPP] screen.
[ON] :Enables IPP
[OFF] :Disables IPP

Accept IPP Job

1
Touch either the [YES] or [NO] key on the [Accept IPP job] screen.
[YES] :Sets the machine to accept IPP job
[NO] :Sets the machine to decline IPP job
The factory default setting is [YES].
Page 23).
] to switch the screen.
45
4-6. IPP Setup
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel