Konica Minolta 7145 Instruction Manual page 176

Scan Mode
This sets the scanning mode.
The factory default is [One sided].
1
Select [Scan mode] in [Initial setting] screen.
When you touch the [
For details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
( Page 154).
2
Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
Two sided → One sided
3
Touch the [RETURN] key.
From now on, the copier operates in accordance with this settings.
] or [ ] key, the selection item is switched.
167
8-2. Scanner Initial Settings
IV Scanner Key Operator - Administrators only
Chapter 8 Key Operator Settings