Auto/Reset Mode; Automatic Paper Selection (Aps); Automatic Magnification Selection (Ams); Automatic Exposure (Ae) - Konica Minolta 7055 Instruction Manual

Section 3 : Machine Information
Initial Settings
Initial settings represent the initial condition when power is turned on; when EKC password
is set; or when Auto/Reset mode is restored, either manually or automatically.
Print Quantity; 1
Magnification Ratio: 1:1 (key operator setting)
RADF: ON (key operator setting)
Copy mode: 1-1 mode (key operator setting)
AE: (Automatic Exposure) : ON (key operator setting)
APS: (Automatic Paper Selection): ON (key operator setting)
Finisher: Non-sort on Primary (main) tray (key operator setting)

Auto/Reset Mode

The Auto/Reset function can be set for OFF/ 30 seconds/ 1 minute/ 1.5 minutes/ 2 minutes/
2.5 minutes/ 3 minutes/ 3.5 minutes/ 4 minutes/ 4.5 minutes/ 5 minutes by the key operator.
Initially, the mode is set to function after 1 minute of copier inactivity. The Auto/Reset key
function also re-displays the Basic Screen, unless these settings are changed by the key
operator in the Initial Setting Menu Screen. See p. 12-42 to p. 12-46.

Automatic Paper Selection (APS)

When APS is highlighted on the touch screen, the appropriate copy paper size is
automatically selected. When copying from the platen glass or document feeder, APS
detects the sizes indicated below. For key operator settings of APS, see p. 12-42 to p. 12-
46.
PLATEN GLASS: A3, B4, F4, A4R, A4, B5R, B5, A5R (B6R or 5.5"x8.5")
RADF: A3, B4, F4, A4R, A4, B5R, B5, A5R, A5, 8.5"x11"

Automatic Magnification Selection (AMS)

AMS functions automatically when Copy Size is pressed in the Full-Auto mode. An
appropriate ratio is selected, based on the relationship of copy size to original size.

Automatic Exposure (AE)

When AE is highlighted on the touch screen, the appropriate exposure level is automatically
selected to match the copy density of the original. Manual density adjustments override
AE.

Automatic Tray Switching (ATS)

When the selected paper tray becomes empty while copying is in progress, automatic tray
switching detects the same copy paper size loaded in another tray to allow copying to be
continued without interruption. The Multi-sheet bypass tray is not included in tray switching.
Automatic Tray Switching is switched on by using the key operator mode.
3 - 10